Current SMART FOCUS Software
These files are for the SMART FOCUS PC Focuser Control program.
Select a link below to download the file.
Smart Focus Operator's Guide (revised
Control Software (2013 - ver 18.104.22.168) Windows
Remove "2013-7" from file name after download
This version is ONLY compatible with Windows 7
Control Software (2011 - ver 22.214.171.124)
Remove "2011" from file name after download
This version is NOT compatible with Windows 7
Focuser Control Software (2005 - ver 126.96.36.199)
Remove "2005" from file name after download
This version is NOT compatible with Windows Vista and Windows 7
Installion Batch File
ASCOM Driver Link
FOCUSER SPECIFICATION FILES (with 2160
* After downloading a focuser specification file,
rename it by removing the "_" (underscore) and everything before it or use the
format fc0000#.df1 where # is replaced by a number. For example,
NGF-XTcM_fc00001.df1 should be renamed to fc00001.df1 after downloading or it
will not be recognized by the software. You may need to change the number
in order to keep from overwriting files you have already created. For
example, change fc00001.df1 to fc00002.df1.
If your spec files are not showing up on the configuration tab of the software,
try selecting the Restore Default File Settings on the Configuration Tab.
This will restore default settings for Baud Rate (9600), COM Port (COM1), Units
(Inches) and Step Increments (0.01"). It also collects information on
stored focuser data and rebuilds the Focuser List, including assigning a number
for the next focuser specification file name. (Removing the focuser.dc1
control file and restarting the software will accomplish the same thing.
The control file will be automatically recreated.)
Specification files are used by the new
software (version 188.8.131.52) to store information on your focuser(s).
software will walk you through creation of a spec file for focusers not listed, we are providing
a few files for brand new and
obsolete focusers for your convenience.